EMC Fest 2018 Vendor Registration

#Automotive #EMC #IEEE #SEM #EMCFest #2018
Share

ALL TABLES SOLD OUT

EMC Fest '2018 Vendor Registration

May 10, 2018

Topics: See Agenda Below

Important Registration Information - Please read First!

Vendor and Committee Dinner Registraiton Page

 Location: Embassy Suites 19525 Victor Parkway, Livonia, Michigan,48152, USA

Vendor Information Letter (English)

Vendor Information Letter (Japanese)

The Art and Science of EMC Design -  Colin Brench

 

Colin is a joint author of the following Kindle textbook available on Amazon for $23.74:

EMI/EMC Computational Modeling Handbook - 2nd Edition, Kindle Edition

 

 

 

Chapter website: http://www.emcsociety.org

To be added or removed from the Southeastern Michigan IEEE EMC email list, please send an email to scott@emcsociety.org  with ADD or REMOVE as the subject.    If this email was forwarded to you, please reply with REMOVE as the subject



TABLE TOP DISPLAY $375.00

Company listed as event sponsor on the slideshow

 Company has table top display (30"W x 72"L) during exhibit hours

Company receives one complimentary EMC Fest event registration and

one admission to the vendor – committee reception evening before event

but must separately pre-register for the dinner event.

 

TABLE TOP DISPLAY AND LUNCH SPONSOR $500.00

Company listed as event sponsor on slide show

Company has table top display (30"W x 72"L) during exhibit hours

Company advertised with signage at event as sponsor of lunch

Company receives one complimentary EMC Fest event registration and

one admission to the vendor – committee reception evening before event

but must separately pre-register for the dinner event.

TABLE TOP DISPLAY AND LUNCH AND RECEPTION SPONSOR $700.00

Company listed as event sponsor on slideshow

Company has table top display (30"W x 72"L) during exhibit hours

Company advertised with signage at event as sponsor of lunch and reception

Company receives one complimentary EMC Fest registration and

one admission to the vendor – committee reception evening before event

but must separately pre-register for the dinner event.

 



  Date and Time

  Location

  Hosts

  Registration



  • Date: 10 May 2018
  • Time: 07:00 AM to 05:00 PM
  • All times are (GMT-05:00) US/Michigan
  • Add_To_Calendar_icon Add Event to Calendar
  • 19525 Victor Parkway
  • Livonia, Michigan
  • United States 48152
  • Building: Embassy Suites

  • Contact Event Host
  • Scott Lytle Registrar.  scott@emcsociety.org 734-983-6012

     

     

  • Starts 22 January 2018 12:00 AM
  • Ends 10 May 2018 03:19 PM
  • All times are (GMT-05:00) US/Michigan
  • Admission fee ?
  • Menu: Regular, Vegetarian, Gluten Free, Vegan


  Speakers

Colin Brench of Amphenol High Speed Interconnects,

Topic:

See Agenda

Biography:

Colin E. Brench (M'80-SM'04) is currently a Principal Engineer at Amphenol High Speed Interconnects, in Nashua, New Hampshire, where he is responsible for the EMC aspects of high data rate (10 to 56 Gbps) interconnect schemes.

He received his B.Sc. (Hons) in Electronic Engineering at The City University, London, in 1975, and has been particularly active in the areas of EMC, antennas, and shielding behavior since the early 1970's.  Colin has presented numerous EMC workshops and training classes that embrace a broad range of topics including microprocessor packaging, printed circuit module issues, system design, and shielding.  He is a co-author of the book, EMI/EMC Computational Modeling Handbook (Springer, 2nd Edition 2001), has authored over 20 technical papers and articles, and holds 12 patents for various methods of EMI control. 

Colin is a Senior Member of the IEEE, member of the EMC Society since 1980, and an iNARTE certified EMC Master Design Engineer.  He was appointed a Distinguished Lecturer for the IEEE EMC Society for 2001 and 2002, and has given several seminars for various IEEE chapters and sections.  In 2002 he was awarded the Certificate of Technical Achievement by the IEEE EMC Society for his contributions to the development of EMC modeling directed to understanding EMI shielding and antenna behavior.  

Colin has also been active in IEEE EMC-S standards, IEEE EMC-S Technical Committee 9 (TC-9), ANSI ASC63, and served 11 years on the IEEE EMC-S Board of Directors. 

Email:

Address:New Hampshire, United States





Agenda

      

Program Outline: Thursday May 10, 2018

6:00   Vendor Table Setup (till 8:30) 

 

 

8:00   REGISTRATION & EXHIBITS 

 

 

8:30   CONTINENTAL BREAKFAST 

9:00
 

Session 1 – The Science of EMC Design

This will look at the underlying physics of different topics; such as shielding, antennas, and coupling.  Also the details of what is actually known will be considered.

10:00   Break & Exhibits  

11:00
 
Session 2 –
 The Tools Used for EMC Design

In this section, the means of solving the above physics problems will be covered, that is; computational techniques, analytic techniques and more.  Here the importance of what is not known will also be discussed

12:00   LUNCH

1:00
 

Session 3 – The Art of EMC Design

The correct application of the tools will be covered in this piece.  Understanding the tools’ true capabilities to address a given problem and their limitations will be the focus.  The importance of the engineer’s existing skills is a major component at this stage of a design.

2:00   Break & Exhibits 

3:00
 

Session 4 – Design Verification and Validation

Validation of a design will include various measurements and the use of alternate design tools to confirm the design expectations.  All of this finally comes together at the qualification stage, but by this point the EMC design engineer should know what risks exist and have backup plans in place.

4:00   Reception 

 

 

5:00   Close of EMC Fest

 

NOTE: breaks will be scheduled at the speaker’s discretion. Table-top displays (exhibits) will be open during registration, lunch, all breaks, and the reception. Access to the table-top displays is available during the technical sessions, but the displays may not be manned during those times.            

 

Hotel Information: Embassy Suites is offering a limited number of reduced rate rooms for $121. Internet, Pool, Cocktail Reception and breakfast buffet are included. You must mention "Group ID: EMC Fest 2018" to get this special rate and reserve your room by April 13. After which rooms and rates are subject to availability. The Embassy Suites Hotel is located 22 miles from Detroit Metropolitan Airport. From I-275 take the 7 Mile Road - East. Travel approximately 1/4 of a mile to Victory Parkway. Turn left on proceed approximately 1/4 mile. Embassy Suites will be on the left . Contact (734) 462-6000 to make arrangements. Airport shuttle is not available so plan a taxi or car to travel to the hotel.

 



IEEE SEM Chapter 8 (EMC)