PathWave Design and Test

#EM #RF #5G #IoT #RFICs #MMICs
Share

IEEE North Jersey AP/MTT Chapter 

 

Presentation #1: EM/Circuit Co-Simulation

30 Minutes

RFPro & SmartMount: Assemble, tune, and optimize RF modules in PathWave ADS. Integrate RFICs, MMICs, laminates, packages, and PCBs from multiple design flows. Instant and error-free setup of EM-Circuit co-simulation across multi-technology stack ups to design densely integrated RF modules for 5G, IoT, and Aerospace/Defense applications.

Presentation #2: Complex Circuit Analysis
30 Minutes

Stability analysis is becoming much more critical in modern high frequency applications because gain and coupling cause new problems to arise that are not easy to resolve in the lab. This demo will introduce a new stability analysis approach using a new probe, called ws-probe in PathWave Advanced Design System to help simplify stability analysis.

Presentation #3: Phased-Array Design
30 Minutes

mmWave phased array systems are taking over communications in the quest for higher data rate connections. Discover how best to model these systems to achieve the system performance it demands. In this demo you will learn about fast, accurate modeling of phased array systems.  Using PathWave System Design, you will see how easily you can construct your system, integrate antenna information from EM simulation, and include RF impairments to accurately model your mmWave circuits.

  Please register for attebding the virtual webina sponsor by MTT-S:

https://www.keysight.com/us/en/events/america/tradeshows/virtual-mmwave-innovations.html


  Date and Time

  Location

  Hosts

  Registration


  • Add_To_Calendar_icon Add Event to Calendar
  • https://www.keysight.com/us/en/events/america/tradeshows/virtual-mmwave-innovations.html
  • North Jersey, New Jersey
  • United States
  • Building: Remote-Anywhere
  • Contact Event Host

  • Dr. Ajay Poddar:akpoddar@ieee.org

    Prof. Edip Niver

    Dr. Anisha Apte:anisha_apte@ieee.org

  • Co-sponsored by IEEE R1 MTT/AP Chapter
  • Starts 15 June 2020 04:00 PM UTC
  • Ends 24 June 2020 04:00 PM UTC
  • No Admission Charge

  Speakers

Jack Sifri Jack Sifri of Keysight Technologies

Topic:

EM/Circuit Co-Simulation

RFPro & SmartMount: Assemble, tune, and optimize RF modules in PathWave ADS. Integrate RFICs, MMICs, laminates, packages, and PCBs from multiple design flows. Instant and error-free setup of EM-Circuit co-simulation across multi-technology stack ups to design densely integrated RF modules for 5G, IoT, and Aerospace/Defense applications.

Biography:

Jack is the MMIC/Module Design Flow Specialist and Product Manager of MMIC simulation technologies. Before joining Keysight, Jack spent 15 years designing RF and microwave circuits for space applications at Hughes Aircraft Co. Jack holds a bachelor degree and a masters degree in electrical engineering from the University of California, Los Angeles and an MBA from the University of Southern California.

Speakers:

Jack Sifri
MMIC/Module Design-Flow Specialist
Keysight Technologies

Dr. Ian Rippke
System Simulation Product Manager
Keysight Technologies

Matt Ozalas
RF Power Amplifier & Module Design Expert
Keysight Technologies

Address:Keysight Technologies, MMIC/Module Design-Flow Specialist , United States, 91109-8099

Matt Ozalas Matt Ozalas of Keysight Technologies

Topic:

Complex Circuit Analysis

Stability analysis is becoming much more critical in modern high frequency applications because gain and coupling cause new problems to arise that are not easy to resolve in the lab. This demo will introduce a new stability analysis approach using a new probe, called ws-probe in PathWave Advanced Design System to help simplify stability analysis.

Biography:

Matt received his BSEE from Penn State University in 2001 and his MSEE and MBA from Arizona State University in 2010. From 2001 to 2005, he worked at the Mitre Corporation where he did RFIC and Power Amplifier Design for a variety of high frequency applications. From 2005-2013, he worked at Skyworks Solutions in the Santa Rosa Design Center, designing and developing high volume multiband power amplifier and front end modules for wireless handsets. He joined Keysight EEsof EDA in 2013, where he is currently working as an Application Developer and Product Owner for ADS. 

Speakers:

Jack Sifri
MMIC/Module Design-Flow Specialist
Keysight Technologies

Dr. Ian Rippke
System Simulation Product Manager
Keysight Technologies

Matt Ozalas
RF Power Amplifier & Module Design Expert
Keysight Technologies

Address: RF Power Amplifier & Module Design Expert, Keysight Technologies





Agenda

Join webinar on June 24, 2020 at 12:00 PM (EST-NY Time Zone)

You may log in 15 minutes prior.

Virtual Meeting: Participants can join from anywhere.

Please register for attebding the virtual webina sponsor by MTT-S and Keysight:

https://www.keysight.com/us/en/events/america/tradeshows/virtual-mmwave-innovations.html