A full duplex antenna for the 5.8 GHz ISM band
This presentation will discuss the design and implementation of a single-layered slot antenna for in-band full duplex operation applications at 5.8 GHz, without the use of a coupler. High port isolation is achieved by strong separation of the even-mode and odd-mode feeds. Microstrip-coupled coplanar waveguide is used at the transmit port to excite a stepped-slot antenna in the odd mode. On the opposite side, a microstrip T-junction power divider is employed at the receive port to feed two offset-fed stepped-slot antennas in even-mode. Port isolation is further improved by 30 dB, by using a lumped capacitor at the termination of the coplanar waveguide. Equivalent circuit models are discussed to ease the impedance optimisation process.
Date and Time
Location
Hosts
Registration
- Date: 17 Feb 2021
- Time: 04:00 PM to 05:00 PM
- All times are (GMT+10:00) Australia/Victoria
-
Add Event to Calendar
- Melbourne, Victoria
- Australia
- Starts 05 February 2021 03:23 PM
- Ends 16 February 2021 12:00 PM
- All times are (GMT+10:00) Australia/Victoria
- No Admission Charge
Speakers
Anh Ngoc Nguyen of La Trobe University
Biography:
From Ha Noi, Vietnam, Anh Ngoc received the BE degree in electronics and telecommunication engineering from Hanoi University of Science and Technology, from 1998 to 2003. From 2006 60 2008, he joined the Master’s course on Microwave & Antenna at Korea Advanced Institution of Science and Technology. From 2012 to 2017, he joined Motorola Solution as Senior Engineer, designing RF hardware for two-way radio communication (walkie talkie product). He then joined the PhD program of RFIC and Antenna, at the Centre of Technology Infusion at Latrobe University, from 2017 to now. In between, he worked as an R&D engineer at hardware companies including Tosy robotics, and ATS.
Address:Victoria, Australia