Workshop: Control System Design with MATLAB and Simulink

#Control #System #Design #MATLAB #Simulink
Share
Date: Tuesday June 17, 2014 Place: Dartmouth Conference Room, 1 Apple Hill Dr, Natick, MA 01760 Time: 9:00 A.M - 3:00 P.M. Subject: Workshop: Control System Design with MATLAB and Simulink Dear IEEE ComSoc Members of the Worcester County Section, At this complimentary workshop, you will learn how to design and tune control systems ranging from simple PID controllers to complex control architectures to satisfy multiple design requirements. You will use the tools first hand. You will also have an opportunity to interact with MathWorks control design experts. Learn how to: (1) Create plant models from input/output test data and automatically tune PID controllers using these models; (2) Define control architectures in Simulink, ranging from simpler SISO PID controllers to more advanced multi-loop and multivariable controllers; (3) Automatically tune all controller parameters simultaneously to meet design requirements; (4) Model uncertainty to quantify the robustness of your control laws. Who Should Attend: This workshop is designed primarily for control system engineers who are familiar with MATLAB and Simulink.

  Date and Time

  Location

  Hosts

  Registration


  • Add_To_Calendar_icon Add Event to Calendar
  • 1 Apple Hill Dr.
  • Natick, Massachusetts
  • United States 01760
  • Building: Dartmouth Conference Room
  • Click here for Map
  • Contact Event Host
  • Ilir Progri, Ph.D. Senior Member IEEE & ComSoc IEEE ComSoc Chapter Chair of the IEEE WCS ifprogri@ieee.org http://www.comsoc.org/about/chapters/worcester-county-chapter http://twitter.com/IEEEWCSComSocCh or @IEEEWCSComSocCh https://www.facebook.com/pages/IEEEWCSComSocChap/264688786958027 http://www.linkedin.com/groups/ComSoc-Chapter-IEEE-WCS-4611806
  • Co-sponsored by Ilir Progri, CEO Giftet Inc




Agenda

1. 9:00 A.M. Registration and continental breakfast

2. 9:30 A.M. - 11:00 A.M. PID controller tuning using PID Tuner. Plant model identification from measured input-output test data.

3. 11:00 A.M. - 11:15 A.M. Break.

4. 11:15 A.M. - 12:15 P.M. Tuning controllers using Control System Tuner and SYSTUNE. Simple example.

5. 12.15 P.M. - 12.45 P.M. Complimentary Lunch

6. 12:45 P.M. - 2.15 P.M. Using Control System Tuner and SYSTUNE. Tuning multiple loops simultaneously. Tuning a control system against a set of plant models.

7. 2:15 P.M. – 3:00 P.M. Conclusion and Q/A.