IEEE EMC-S PL reported activity no. 08/2021: "MARATHON EMC 2021 Binational Edition Part 4: Poland – Spain"
Main theme: Protection of electrical installations against electromagnetic disturbances in EMC
MARATON EMC 2021 Binational Edition is continuation of the series of on-line courses by common title "MARATHON EMC" initiated by the IEEE EMC-S PL Board of the Electromagnetic Compatibility Society Polish Chapter of the IEEE. “Binational Edition” is a sub-series constituting invitation of EMC-S Chapters from other countries - both presenters and attendees.
Date and Time
Location
Hosts
Registration
-
Add Event to Calendar
Loading virtual attendance info...
- Contact Event Hosts
- Co-sponsored by Łukasiewicz - ILiM, Universitat Politècnica de Catalunya, WAVECONTROL / University of Bologna
- Survey: Fill out the survey
Agenda
AGENDA
|
Topic I |
Time-domain interference measurement and evaluation methods in Electromagnetic Compatibility |
|
Date |
10th June 2021, 9:30 – 10:15 |
|
Description |
In this presentation, it will be shown that it is feasible to use a time-domain system based on the use of an oscilloscope to obtain EMI emissions measurements according to EMC standards. The time-domain methodology will be described from the acquisition stage to the different interference post-processing stages to provide results in compliance with CISPR16-1-1. |
|
Speaker |
Marc Pous |
|
|
|
|
Topic II |
Using an FFT EMI-Modal Receiver to optimize your EUT power line filter |
|
Date |
10th June 2021, 10:30 – 11:15 |
|
Description |
Nowadays measurements of conducted emission are carried out with instruments that can only measure the emissions coming from line and neutral terminals but are not capable of separating the modal interference, common mode (CM) and differential mode (DM). Worldwide legislation, such as the European EMC Directive, sets mandatory interference limits that must be met. In this Workshop we will show how easy is to distinguish between the CM and DM interference, using an EMI-Modal Receiver, and how to properly use this information in the design of the Power Line Filter. |
|
Speaker |
Marco Bosi |
|
|
|
Topic III
| How to write your own software for automation of conducted emission measurement. | |
|
Date |
10th April 2021, 11:30 – 12:15 |
|
Description |
During the workshop examples of original computer programs that automate the measurement of conducted emission on the LabView environment will be described. The indicated algorithms of proceeding coming directly from the standards and own methods of frequency selection will be shown. Examples of communication between the measurement receiver and computer using GPIB and /or LAN with automatic switching of the artificial network will be presented. |
|
Speaker |
Bartłomiej Nagórny, Krzysztof Sieczkarek |
|
|
|
|
|
|
|
Moderator |
Krzysztof Sieczkarek |
Event organized by IEEE EMC-S PL in co-operation with IEEE EMC-S ES
sign up on: ieee-emcs.org.pl