Metrology for the Evolving Electric Power Grid
The operation of Power Systems relies on measurements of non-electric and electric quantities, which are essential for control, monitoring and protection. Among the measurements of electric quantities are voltage, current, frequency, active and reactive power and energy, and other derived quantities, under both sinusoidal and distorted voltage and current conditions. The revenue metering entails measurements of electric energy and power, and is important for power system economics. A concept of transactive energy combines economic and control techniques and is introduced and used for improving the efficiency and reliability of a more intelligent and interactive Power System. Smart Grid aims at the increase of efficiency, reliability, security, and integration of Renewable Energy Sources into the Power System. Smart Meters, with their two-way communications allowing for reading and control, are one of the basic tools for the Smart Grid introducing at the same time new dynamics into the system and raising privacy issues. With the proliferation of power electronics and increasing presence of Electric Vehicles (EVs) and EV Infrastructure, Power Quality measurements with increasing penetration of higher harmonics are necessary and widespread. In this talk, the measurements with and the calibrations of conventional voltage and current instrument transformers (ITs), electronic voltage and current transformers (EVTs and ECTs) and non-conventional instrument transformers (NCITs) will be discussed. Measurements of losses in power transformers, electrical machines and other equipment important for the efficiency of power transmission, as well as synchrophasor measurements used in for wide-area protection, control and monitoring (WAPCAM) and situational awareness will be discussed as well.
Date and Time
Location
Hosts
Registration
-
Add Event to Calendar
- Simon Fraser University
- 8888 Univeristy Drive
- Burnaby, British Columbia
- Canada V5A 1S6
- Building: Applied Sciences Building
- Room Number: ASB 9896
- Click here for Map
- Contact Event Hosts
-
Ljiljana Trajkovic
School of Engineering Science Simon Fraser University 8888 University Drive Burnaby, BC V5A 1S6 Canada Tel.: (604) 345 7705 (mobile) WWW: http://www.ensc.sfu.ca/~ljilja
Speakers
Branislav of National Research Council (NRC) Canada
Metrology for the Evolving Electric Power Grid
The operation of Power Systems relies on measurements of non-electric and electric quantities, which are essential for control, monitoring and protection. Among the measurements of electric quantities are voltage, current, frequency, active and reactive power and energy, and other derived quantities, under both sinusoidal and distorted voltage and current conditions. The revenue metering entails measurements of electric energy and power, and is important for power system economics. A concept of transactive energy combines economic and control techniques and is introduced and used for improving the efficiency and reliability of a more intelligent and interactive Power System. Smart Grid aims at the increase of efficiency, reliability, security, and integration of Renewable Energy Sources into the Power System. Smart Meters, with their two-way communications allowing for reading and control, are one of the basic tools for the Smart Grid introducing at the same time new dynamics into the system and raising privacy issues. With the proliferation of power electronics and increasing presence of Electric Vehicles (EVs) and EV Infrastructure, Power Quality measurements with increasing penetration of higher harmonics are necessary and widespread. In this talk, the measurements with and the calibrations of conventional voltage and current instrument transformers (ITs), electronic voltage and current transformers (EVTs and ECTs) and non-conventional instrument transformers (NCITs) will be discussed. Measurements of losses in power transformers, electrical machines and other equipment important for the efficiency of power transmission, as well as synchrophasor measurements used in for wide-area protection, control and monitoring (WAPCAM) and situational awareness will be discussed as well.
Biography:
Branislav Djokic received Dipl.Ing. Degree in Power Systems Engineering (1981), Dipl.Ing. Degree in Electronics (1984), and M.Sc. (1988) and Ph.D. (1993) Degrees in Electrical Engineering from the University of Belgrade, Serbia. From 1982 to 1990, he was a researcher at the R&D Institute Mihajlo Pupin, Belgrade. From 1990 to 1994, he was a faculty member of the School of Electrical Engineering, University of Belgrade. In 1994, he joined the National Research Council of Canada, Ottawa, Ontario, Canada, where he has been working as a researcher in the field of electrical power measurements. His research interests include high accuracy measurement systems, data acquisition, measurement automation, and digital signal processing.
Dr. Djokic is a registered Professional Engineer in the Province of Ontario. He is a Fellow of IEEE and a Fellow of Engineering Institute of Canada. He presently serves as an IEEE Instrumentation and Measurement Society (IMS) AdCom Member, IMS VP Confences, IEEE IMS and PES Representative for Canada, IEEE Canada Awards and Recognition Committee Chair, and IEEE Ottawa Section Educational Activities Chair.
Email:
Address:National Research Council (NRC) Canada, , Ottawa, Canada