IEEE MTT-S Distinguished Microwave Lecture
Title of the Talk: Additive Manufacturing: Emerging Opportunities
for Microwave Components
Abstract
Additive Manufacturing (AM), also known as 3D printing, offers fast prototyping, geometric flexibility, easily
customizable products, and in some cases low cost. Using AM for microwave devices, however, is not
straightforward: the technology was not specifically developed for microwave components, and some adaptation
and post-processing is usually necessary. Moreover, many different AM technologies exist, and understanding their
characteristics is essential before selecting one. This presentation provides an overview of the available AM
technologies and analyzes in detail those most commonly used for manufacturing microwave components,
illustrated through several examples. Microwave components fabricated with the most popular AM processes will be
shown, along with the manufacturing steps, post-processing, and all actions needed to make each component
perform well. The talk will also show how the flexibility of AM enables new classes of components with
non-conventional geometries, exploited to achieve high performance in terms of compactness, weight, and losses.
About the Speaker
Cristiano Tomassoni received his Ph.D. in Electronics Engineering from the University of Perugia, Italy, in 1999. He
was a Visiting Scientist at the Technical University of Munich and a Guest Professor at Otto von Guericke
University, Magdeburg, Germany, contributing to the enhancement of several analytical and numerical methods for
electromagnetic simulation. Since 2001 he has been with the University of Perugia, where he is currently an
Associate Professor. His research interests include waveguide components and antennas, miniaturized,
reconfigurable, dielectric, and substrate integrated waveguide filters, and the use of Additive Manufacturing
technologies such as SLA, LCM, SLM, FDM, and PolyJet for microwave components. Prof. Tomassoni is an IEEE
Fellow (Class of 2025), Chair of the IEEE MTT-S MTT-5 Filters Technical Committee, and an IEEE MTT-S
Distinguished Microwave Lecturer. He served as an Associate Editor of the IEEE Transactions on Microwave
Theory and Techniques from 2018 to 2022 and received the 2012 Microwave Prize of the IEEE MTT-S.
Date and Time
Location
Hosts
Registration
Speakers
Cristiano of University of Perugia
Additive Manufacturing: Emerging Opportunities for Microwave Components
Abstract
Additive Manufacturing (AM), also known as 3D printing, offers fast prototyping, geometric flexibility, easily
customizable products, and in some cases low cost. Using AM for microwave devices, however, is not
straightforward: the technology was not specifically developed for microwave components, and some adaptation
and post-processing is usually necessary. Moreover, many different AM technologies exist, and understanding their
characteristics is essential before selecting one. This presentation provides an overview of the available AM
technologies and analyzes in detail those most commonly used for manufacturing microwave components,
illustrated through several examples. Microwave components fabricated with the most popular AM processes will be
shown, along with the manufacturing steps, post-processing, and all actions needed to make each component
perform well. The talk will also show how the flexibility of AM enables new classes of components with
non-conventional geometries, exploited to achieve high performance in terms of compactness, weight, and losses.
About the Speaker
Cristiano Tomassoni received his Ph.D. in Electronics Engineering from the University of Perugia, Italy, in 1999. He
was a Visiting Scientist at the Technical University of Munich and a Guest Professor at Otto von Guericke
University, Magdeburg, Germany, contributing to the enhancement of several analytical and numerical methods for
electromagnetic simulation. Since 2001 he has been with the University of Perugia, where he is currently an
Associate Professor. His research interests include waveguide components and antennas, miniaturized,
reconfigurable, dielectric, and substrate integrated waveguide filters, and the use of Additive Manufacturing
technologies such as SLA, LCM, SLM, FDM, and PolyJet for microwave components. Prof. Tomassoni is an IEEE
Fellow (Class of 2025), Chair of the IEEE MTT-S MTT-5 Filters Technical Committee, and an IEEE MTT-S
Distinguished Microwave Lecturer. He served as an Associate Editor of the IEEE Transactions on Microwave
Theory and Techniques from 2018 to 2022 and received the 2012 Microwave Prize of the IEEE MTT-S.
Contacts: Dr. Dipankar Mitra, Faculty Advisor, IEEE MTT-S Student Branch Chapter, UW–La Crosse · dmitra@uwlax.edu
Timothy Samson, IEEE Denver Joint AP-S / MTT-S Chapter · Timothy.W.Samson@lmco.com
Prof. Aline Eid, Chair, IEEE SEM Chapter IV Trident · alineeid@umich.edu
IEEE membership
Biography:
Cristiano Tomassoni received his Ph.D. in Electronics Engineering from the University of Perugia, Italy, in 1999. He
was a Visiting Scientist at the Technical University of Munich and a Guest Professor at Otto von Guericke
University, Magdeburg, Germany, contributing to the enhancement of several analytical and numerical methods for
electromagnetic simulation. Since 2001 he has been with the University of Perugia, where he is currently an
Associate Professor. His research interests include waveguide components and antennas, miniaturized,
reconfigurable, dielectric, and substrate integrated waveguide filters, and the use of Additive Manufacturing
technologies such as SLA, LCM, SLM, FDM, and PolyJet for microwave components. Prof. Tomassoni is an IEEE
Fellow (Class of 2025), Chair of the IEEE MTT-S MTT-5 Filters Technical Committee, and an IEEE MTT-S
Distinguished Microwave Lecturer. He served as an Associate Editor of the IEEE Transactions on Microwave
Theory and Techniques from 2018 to 2022 and received the 2012 Microwave Prize of the IEEE MTT-S.
Address:United States
Add Event to Calendar