Distribution Voltage Regulation Seminar - Parts 3 & 4
PES / IAS / LM Joint Meeting
NOTICE - This session will be paid for by the North Jersey Section PES as a courtesy to our members and prospective members during these challenging times of COVID-19. There will be no charge for participation and Continuing Education Unit credits.
This session is being offered as a GoToMeeting (details below).
The seminar will cover:
Distribution Voltage Regulation Series: Methods to Regulate the Voltage on the Distribution Grid
Introduction: This is a 10 - session presentation meant to assist engineers in designing the proper voltage regulation
architecture for the distribution grid. Each session takes approximately 45-50 minutes with a 10-15
minute period at the end for questions. The presentations should prove beneficial to technicians and
engineers responsible for distribution standards and design, distribution planning engineers, power
quality engineers as well as SCADA/ communications engineers. Below is a brief description of each
session.
Part 3) LTCs, Regulators and their Controls
This session covers the series applied voltage regulation devices and the settings in the regulator/LTC
controls. Settings covered include bandcenter, Bandwidth, time delay, and Line Drop Compensation.
Blocking of the controls due to tap position, abnormal voltages and currents exceeding the rating of the
device are also covered.
Part 4) Capacitor Banks and Control
This session covers shunt connected capacitor banks, both fixed and switched. It also covers single
phase operated versus three-phase individual operated capacitor switching. It also discusses the types
of switches used with capacitor banks as well as the use of line post sensors and neutral current sensors.
Finally it covers the different control modes (Voltage, Var and current) as well as overrides
(temperature, time and remote).
Date and Time
Location
Hosts
Registration
- Date: 01 Oct 2021
- Time: 09:00 AM to 11:00 AM
- All times are (GMT-05:00) US/Eastern
-
Add Event to Calendar
- Starts 17 September 2021 06:00 AM
- Ends 01 October 2021 08:55 AM
- All times are (GMT-05:00) US/Eastern
- No Admission Charge
Speakers
Bob McFetridge of Beckwith Electric
Distribution Voltage Regulation Seminar
Biography:
Bob McFetridge has over 30 years experience serving the electric utility industry. He started his career with Dominion Energy and Southern Company in the areas of SCADA and substation commissioning and testing. Bob then transitioned to the work with several vendors in the areas of substation automation, distribution automation, power quality, system protection and for the last 10 12 years has specialized in the area of distribution voltage regulation. For the last 5 years he has focused on how the addition of distribution connected solar and wind impacts power quality and voltage regulation. Bob is currently a Applications Engineer for Beckwith Electric (a Hubbell Utility Automation Solutions company) supporting the Northeastern US and Canada.
Email:
Address:United States
Agenda
Two hours of instruction will be provided.
This session is being offered as a GoToMeeting:
https://global.gotomeeting.com/join/997477389
You must register through VTools in advance in order to receive your CEU Certificate. PLEASE NOTE: Your certificate will go to the email address you use to register through VTools and will have your name exactly as you enter it when registering. It will come from “IEEE Certificate <eab-ceuadmin@ieee.org>” Please make sure this address is in your safe senders list. If you have any problems with receipt of your CEU Certificates, please contact eab-ceuadmin@ieee.org
Please check your GoToMeeting connection in advance as there will be no support available.
All invited - please post.