Testing HDMI 1.4b / 2.1 interfaces with oscilloscopes

Share

IEEE North Jersey Section Co-sponsors the event


  • In this webinar, the talk will be focussed on high-speed digital design, test,  and HDMI 1.4b / 2.1 interfaces. 

For login information and password, please register by clicking the online link: Register Here



  Date and Time

  Location

  Hosts

  Registration



  • Date: 18 Jan 2022
  • Time: 02:00 PM to 03:00 PM
  • All times are (GMT-05:00) US/Eastern
  • Add_To_Calendar_icon Add Event to Calendar
  • Virtual Technical Webinar Meeting
  • Virtual, New Jersey
  • United States
  • Building: Virtual

  • Ajay Poddar (akpoddar@ieee.org), Edip Niver (edip.niver@njit.edu), Anisha Apte (anisha_apte@ieee.org)

  • Co-sponsored by IEEE North Jersey Section


  Speakers

Guido Schulze Guido Schulze of Rohde & Schwarz

Topic:

Testing HDMI 1.4b / 2.1 interfaces with oscilloscopes

This webinar is intended for engineers who work on high-speed digital design and tests. In particular, we will be focusing on HDMI 1.4b / 2.1 interfaces. After an overview of HDMI technology, we will be discussing testing for compliance to the standard, and signal integrity debugging. We will go into details on the test setup, clock test including timing and jitter, and data lane test covering single-ended and differential measurements. We will discuss possible actions when the compliance test fails; tools such as eye diagram analysis, jitter and noise decomposition, and TDR / TDT analysis can help to identify the causes. Practical examples and demonstrations illustrate HDMI testing made easy and reliable.

Biography:

Guido Schulze has more than 20 years of experience in high-speed digital testing. For the last ten years, he has worked as a product manager for the oscilloscope product division at Rohde & Schwarz. He specializes in high-end models and their respective applications.

Address:Rohde & Schwarz, , United States

Johannes Ganzert Johannes Ganzert of Rohde & Schwarz

Topic:

Testing HDMI 1.4b / 2.1 interfaces with oscilloscopes

Biography:

Johannes Ganzert is a Senior Applications Engineer for oscilloscopes at Rohde & Schwarz in Munich. After graduation from the Technical University of Munich, he joined R&S as a development engineer for digital hardware and software. Over time, Johannes Ganzert collected vast experience in RF and digital applications, particularly high-speed digital design and serial buses. He is an active participant in several standardization consortia like OPEN Alliance and USB-IF.





Agenda

For login information and password, please register by clicking the online link: Register Here